The SlimPac Environmental Control Units (ECU) are designed for the
telecommunications cabinet. The SlimPac is built in cooling capacities
of 1 and 1-1/2 tons. The slim profile allows the unit to be mounted on
the exterior of the cabinet on either side of the splice chamber
allowing for redundant cooling. A counterflow design, the cool air is
discharged near the bottom of the SlimPac. It is designed for use in
ambient temperatures from 0°F to 120°F (-18°C to
40°C). The low noise level makes the SlimPac ideal for use in
urban and residential areas. Electric heat (3.6 kW) is standard.
Manufactured and tested to UL Standard 1995, 2nd Edition and
CAN/CSA-C22.2 No. 236-95, 2nd Ed.
Designed for Operation in Low Ambient Conditions
Low ambient control regulates the condenser fan (ECU12) or blower (ECU18) to maintain proper refrigerant pressures.
Built-in Reliability
Low refrigerant pressure switch (ECU18 only), freeze stat and high pressure switch protect refrigerant circuit.
Time delay/anti-short cycle timer prevents rapid cycling of the compressor.
Dry contacts for remote monitoring of lockout due to high or low refrigerant pressure.
Powder-coated finish for long term durability.
Vandal Resistant
All panels secured with tamper resistant screws (ECU12 only).
All mounting holes are inside the SlimPac.
Options
Grilles
Thermostat and Controllers
Downloadable literature
Get the latest version of Adobe Acrobat Reader here.
Instructions for Downloading Marvair Literature
In order to quickly download a pdf, please right-click on the file name
and then save to your hard drive. After saving to your hard drive, then
open the pdf using Adobe Acrobat and either print or view. At times,
attempting to open a file instead of downloading can cause the file to
open very slowly or stall at a certain point. Also, firewalls or
anti-virus programs can cause errors or stalls. If you have problems
downloading any Marvair files, please contact Mary Beth Evans at
mbevans8@comcast.net and she can send the file to you via e-mail.
The SlimPac Environmental Control Units (ECU) are designed for the
telecommunications cabinet. The SlimPac is built in cooling capacities
of 1 and 1-1/2 tons. The slim profile allows the unit to be mounted on
the exterior of the cabinet on either side of the splice chamber
allowing for redundant cooling. A counterflow design, the cool air is
discharged near the bottom of the SlimPac. It is designed for use in
ambient temperatures from 0°F to 120°F (-18°C to
40°C). The low noise level makes the SlimPac ideal for use in
urban and residential areas. Electric heat (3.6 kW) is standard.
Manufactured and tested to UL Standard 1995, 2nd Edition and
CAN/CSA-C22.2 No. 236-95, 2nd Ed.