The Marvair Marine vertical packaged air conditioners provide cooling and dehumidification in commercial vessels. The units are built in both air (models MVS) and water source (models MVW) configurations with cooling capacities of 5, 7, 10 and 12 tons and are ideal for new installations and replacement of existing air conditioners. The vertical configuration minimizes floor space and blends into a variety of working environments. The cool, dry air can be discharged directly into the room or ducted into adjacent rooms. All service and maintenance is performed from the front or side of the unit- no need to move the unit for service or maintenance. To ensure years of dependable performance, all components are housed in a superior corrosion resistant steel cabinet. The galvaneal steel is bonderized and followed by a heat cured enamel neutral gray finish.

Air Cooled Units
The MVS air cooled units have an indoor air mover, coil, compressor and controls. A remote condenser (not provided by Marvair) connects to the MVS unit with field installed refrigerant lines. The units are shipped with a dry nitrogen charge and may be used with either R-22 or R-407c refrigerant.

Water Cooled Units
The MVW water cooled air conditioners are packaged units shipped from the factory with R-407c refrigerant and an internal condenser and ready to run. The coaxial tube-in-tube condenser is constructed of corrosion resistant cupronickel water tubing and copper refrigerant tubing for use in either fresh or sea water.

Downloadable Literature All Marine Product Data Sheets, Installation & Operation Manuals, and literature can be found at www.marvairmarine.net